Contact Careers Company

ARRI Rental Claypaky ARRI Certified Pre-Owned ARRI Merchandise Shop

TRINITY Upgrade Product visualization.

Upgrades, components, brackets for TRINITY Gen.1

Upgrade sets

To upgrade TRINITY you can either purchase upgrade sets or individual upgrade components (see list below).

BMS-1 Upgrade Set, Gold Mount, incl. 3 Mounts

K0.0044358

New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery bod...
- Show Components
BMS-1 Upgrade Set, V-Mount, incl. 3 Mounts

K0.0044359

New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery bod...
- Show Components
BMS-1, Battery Mounting Base, Gen.2, (naked)

K2.0037707

The Battery Mounting System Gen.2, contains two key components: The Battery Mounting Base BMS-1 for TRINITY Gen.1. and the two additional battery mounts, which are availabl...
Gold Mount for BMS-1/BMS-2

K2.0040285

New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery bod...
V-Mount for BMS-1 / BMS-2

K2.0040286

New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery bod...

Individual upgrade components

To upgrade TRINITY you can either purchase upgrade sets (see list above) or individual upgrade components.

TST-1, ARTEMIS 2 Top Stage, 10-pin

K2.0039687

The new ARTEMIS 2 top stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate ...
Battery Hanger Gen.2, incl. 19 mm Rods

K0.0044360

The Battery Hanger Module Gen.2, BHM-2 is a future-proof, high-performance power supply for ARTEMIS and TRINITY camera stabilization systems. Regardless of the batteries us...
- Show Components
BMS-2, Battery Mounting Base, Gen.2, (naked)

K2.0039300

The Battery Mounting System generation 2 contains two key components: The Battery Mounting Base BMS-2 for ARTEMIS and TRINITY generation 2, or BMS-1 for TRINITY generation ...
Gold Mount for BMS-1 / BMS-2, Set

K0.0044355

New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. NOTE To complete the initial order, at least one of the mandatory battery mounting sets mus...
- Show Components
V-Mount for BMS-1 / BMS-2, Set

K0.0044356

New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. NOTE To complete the initial order, at least one of the mandatory battery mounting sets mus...
- Show Components
B-Mount for BMS-2, Set

K0.0044357

New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. NOTE To complete the initial order, at least one of the mandatory battery mounting sets mus...
- Show Components
DUB-3, Dovetail Utility Base / 3

K2.0040347

The DUB-3 is the compact version of the Dovetail Utility Base DUB-1. As with the DUB-1, the tool-free clamping mechanism of the DUB-3 TRINITY 2 allows the mounting of all a...
TRINITY Side to Side Fine Adjustment

K2.0041235

The side-to-side fine adjustment enables quick and precise positioning of the camera in the DUB-3. For TRINITY 2 and as an upgrade for TRINITY Gen.1 in combination with DU...

CSS dovetails

Dovetail Utility Base DUB-2

K2.0044813

The DUB-2 is a connecting piece for cameras rigged for stabilizers such as Artemis 1 as well as Tiffen or GPi Pro stabilizers. The DUB-2 allows cameras to be swiftly mounte...
Dovetail Utility Base DUB-1

K2.0039861

The Dovetail Utility Base DUB-1 is a stable baseplate that allows cameras rigged for ARRI Camera Stabilizer Systems to be mounted on supports such as fluid heads and film c...
Stabilizer Adapter Mount SAM-Zero

K2.0041201

The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer systems products. The 254mm (10”) plate will allow most camera featuring...
Stabilizer Adapter Mount SAM-1 for ALEXA

K2.0018851

The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI TRINITY and MAXIMA system. The SAM-1...
Stabilizer Adapter Mount SAM-2 for ALEXA Mini

K2.0014215

The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
Stabilizer Adapter Mount SAM-2 Set for ALEXA Mini

KK.0016116

Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
- Show Components
Stabilizer Adapter Mount SAM-3 for AMIRA

K2.0014630

The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
Stabilizer Adapter Mount SAM-4

K2.0033662

The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
Stabilizer Adapter Mount SAM-3 Set for AMIRA

KK.0016114

Stabilizer Adapter Mount SAM-3 for AMIRA with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime lenses
- Show Components
Stabilizer Plate for CBP 355mm/14in

K2.0039803

This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dove...
Stabilizer Plate for CBP 450mm/18in

K2.0038536

The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS produc...
Long Stabilizer Mount 15mm Mini/Mini LF

KK.0038971

The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included is a long Stabilizer Plate for CBP 45...
- Show Components
Long Stabilizer Mount 19mm Mini/Mini LF

KK.0038972

The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included are a long Stabilizer Plate for CBP 4...
- Show Components
Stabilizer Plate for CBP

K2.0014981

Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini/ Mini LF (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible...
Compact Lens Support CLS-1

K2.0039089

The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zoom...
Stabilizer System Bracket SSB-2 19mm

K2.0038537

The Stabilizer System Bracket SSB-2 19mm studio is an adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e....
Stabilizer System Bracket SSB-2 15mm

K2.0038618

The Stabilizer System Bracket SSB-2 15mm studio is an adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e....
Balance Utility Dovetail BUD-2

K2.0040036

This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD- 2 is available se...

CSS brackets

SSB-5, Counterweight Bracket, TRINITY Gen.1, 25 g/50 g

KK.0043882

Additional counterweight for the TRINITY Gen.1. The bracket is mounted at the bottom of the outer ring of the TRINITY Gen.1 and allows 25, 50, or 75 grams of extra weight t...
SSB-4, Stabilizer Systems Bracket 4

K2.0044225

The compact and lightweight Stabilizer System Bracket SSB-4 can be mounted at the top of the ring of the TRINITY 2 on both sides. The SSB-4 allows the following brackets to...
Counterweight Set, 150 g, 300 g

KK.0033710

The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counter...
Counterweight, CW-1, 150 g

K2.0033569

Additional compact counterweight. Weight: 150 g/0.33 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Counterweight, CW-2, 300 g

K2.0033574

Additional compact counterweight. Weight: 300 g/0.66 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Counterweight CW-3, 50 g

K2.0043875

Additional compact counterweight. Weight: 50 g/0.110 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Counterweight CW-4, 25 g

K2.0043876

Additional compact counterweight. Weight: 25 g/0.055 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
3/8-16 Extension

K2.0042826

The 3/8" extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen.2. Attaching counterweights to the side of the top and bottom stages TST-1, TS...
Counterweight Ring, Donut, 800 g

K2.0031236

The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8" and 1.5" center posts. The Delrin adapters make it possible to mount t...
CSS Clamp Bridge 52, 19 mm

K2.0042837

Clamping bridge that can be clamped onto the rods of the battery hanger of TRINITY 2 as well as TRINITY Gen.1 and artemis Gen.1. For ARTEMIS 2, artemis Gen.1, TRINITY 2, ...
Single Support Rod 76 mm/3", 19 mm

K2.0043811

19 mm carbon rod Length: 76 mm/3", Diameter: 19 mm For MGT-2 to place the monitor mount
Support Rods 120 mm/4.7", 19 mm

K2.0040790

1 pair of 19 mm carbon rods Length: 120 mm/4.7", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
Support Rods 305 mm/12", 19 mm

K2.0041327

1 pair of 19 mm carbon rods Length: 305 mm/12", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
Support Rods 430 mm/16.9", 19 mm

K2.0040791

1 pair of 19 mm carbon rods Length: 430 mm/16.9", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
Support Rods 90mm/3.5in, Ø19 mm

K2.0016088

One pair Ø 19 mm, stainless steel, lightweight
Support Rods 150mm/5.9in, Ø19mm

K2.0016090

One pair Ø 19 mm, stainless steel, lightweight
Support Rods 240mm/9.4in, Ø19mm

K2.66270.0

One pair Ø 19 mm, stainless steel, lightweight
Support Rods 340mm/13.4in, Ø19mm

K2.66269.0

One pair Ø 19 mm, stainless steel, lightweight
Support Rods 440mm/17.3in, Ø19mm

K2.0001022

One pair Ø 19 mm, stainless steel.
Support Rods 540mm/21.3in, Ø19mm

K2.72028.0

One pair Ø 19 mm, stainless steel.

CSS components

C-Stand with detachable Turtle Base

K2.0010433

Steel C-stand with detachable Turtle Base . Max. height 155 cm/61" NOTE To park the MAXIMA the Spider (K2.0010425) is needed For all ARTEMIS and TRINITY systems
ARTEMIS Carbon Center Post, 1.8", Short, No Main Cable

K2.0041474

ARTEMIS carbon fiber telescopic center post, 1.8", no-tool clamp, torsion-free guided 1.5" inner post, fine-trim adjustment. Length from 37 cm/14.56" to 46.5 cm/18.3" For...
ARTEMIS Post Extension, 1.8", 3B, length 8.5", 16-pin

K2.0041976

Modular center post extension to extent the 1.8" ARTEMIS center post by 21.6 cm/8.5". Diameter: 1.8" Length: 21.6 cm/8.5" Lemo 3B 16-pin For ARTEMIS 2 and TRINITY 2
ARTEMIS Post Extension 3B, 1.8", length 8.5", 10-pin

K2.0014264

Modular center post extension to extent the 1.8" ARTEMIS center post by 21.6 cm/8.5". Diameter: 1.8" Length: 21.6 cm/8.5" Lemo 3B 10-pin For artemis Gen.1 and TRINITY G...
ARTEMIS Super Post, Gen.2, 1.8", 3B, 16-pin

KK.0041404

The new Super Post, 1.8" Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS a...
- Show Components
Gimbal Handle Extender for 1.8" Gimbal

K2.0010569

Extends the length of the bent gimbal handle by 35 mm/1.37" NOTE Do not combine two extensions. For ARTEMIS 1.8" gimbals
ARTEMIS Knurled Handle Gimbal Extension, 1.8"

K2.0014280

The Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8" ARTEMIS gimbal, giving more control and better handling when the rig is used ...

CSS cables

Power Cable, BHM-2 to TST, 12 V, 24 V, Bat. Data

K2.0037771

High-capacity 12 V/24 V power cable to connect the Battery Hanger Module with the Top Stage or Bottom Stage Gen.2. Lemo 2B 7-pin to Lemo 2B 7-pin, 12 V/24 V For ARTEMIS 2...
Cam Power, Cine, 12 V, XLR, HiCap

K2.0010470

12 V XLR high-capacity camera power cable, Lemo 1B 4-pin to XLR 4-pin, for video cameras, ARRIFLEX 16SR I, ARRI 16SR II, Aaton and other devices using a 4-pin XLR socket. L...
Cam Power, Cine, ALEX A LF, 24 V, Fischer 2-pin

K2.0010471

24 V camera power cable. For ARRI ALEXA, ARRIFLEX 235 and 435. Lemo 1S 3-pin to Fischer 2-pin, 24 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360
Cam Power, Cine, 24 V, ALEXA 35, Mini, AMIRA, 24 V, 8-pin

K2.0020467

24 V camera power cable. ALEXA 35, Mini, Mini LF, AMIRA Lemo 1S 3-pin to Lemo 2B 8-pin, 24 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360
Cam Power, Cine, 12 V, HiCap, ALEXA

K2.0010538

12 V high-capacity camera power cable. Lemo 1B 4-pin to 2-pin Fischer, 12 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Cam Power, Cine, 12 V, HiCap, ALEXA Mini

K2.0010540

12 V high-capacity camera power cable. For ARRI ALEXA Mini, AMIRA, Lemo 1B 4-pin to Lemo 2B 8-pin, 12 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Cam Power, Cine, 12 V, HiCap, AMIRA, 90°

K2.0010565

12 V high-capacity camera power cable. ARRI ALEXA Mini, AMIRA, Lemo 1B 4-pin to Lemo 2B 8-pin, 90° elbow, 12 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Cam Power, Cine, 12 V, HiCap, RED Epic

K2.0010472

12 V high-capacity camera power cable for RED Epic. Lemo 1B 4-pin to Lemo 1B 6-pin, 12 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
Cam Power, Cine & EFP, 12 V, XLR

K2.0010469

12 V XLR camera power cable for broadcast cameras, ARRIFLEX 16SR I, 16SR II, Aaton Lemo 1S 3-pin to XLR 4-pin, 12 V For artemis Gen.1, TRINITY Gen.1, SRH-3, SRH-360, MAXI...
Cam Power, EFP, 12 V, HiCap, XLR

K2.0010473

12 V XLR high-capacity camera power cable. Broadcast cameras, ARRIFLEX 16SR I & 16SR II & Aaton Lemo 2B 6-pin to XLR 4-pin. For ARTEMIS EFP HD only!
Cam Power, EFP, 12 V, HiCap, ALEXA

K2.0010474

12 V high-capacity camera power cable. ARRI ALEXA Lemo 2B 6-pin to 2-pin Fischer. For ARTEMIS EFP HD only!
Cam Power, EFP, 12 V, HiCap, AMIRA, 90°

K2.0010543

12 V high-capacity camera power cable. ARRI AMIRA, ALEXA Mini Lemo 2B 6-pin to Lemo 2B 8-pin, 90° elbow. For ARTEMIS EFP HD only!
Cam Power, EFP, 12 V, HiCap, ALEXA Mini

K2.0010544

12 V high-capacity camera power cable. ARRI AMIRA, ALEXA Mini Lemo 2B 6-pin to Lemo 2B 8-pin. For ARTEMIS EFP HD only!
Cam Power, EFP, 12 V, HiCap, RED Epic

K2.0010475

12 V high-capacity camera power cable. RED Epic Lemo 2B 6-pin to Lemo 1B 6-pin. For ARTEMIS EFP HD only!
TRINITY Gen.1 PWR, Lemo 1B 4-pin to 1B 4-pin

K2.0010290

12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the Top Stage. Lemo 1B 4-pin to 1B 4-pin, 12 V For TRINITY Gen.1
TRINITY Gen.1 PWR, Lemo 1S 3-pin to 1B 4-pin

K2.0010291

12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the Top Stage. Lemo 1S 3-pin to 1B 4-pin, 12 V For TRINITY Gen.1
TRINITY Gen.1 PWR, Lemo 1B 4-pin to 2B 6-pin

K2.0010292

12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the ARTEMIS EFP Top Stage. Lemo 1B 4-pin to 2B 6-pin For TRINITY Gen.1& ARTEMIS EFP
TRINITY Gen.1 PWR GPI, Lemo 1S 3-pin to 1B 4-pin

K2.0010301

12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the Top Stage. Lemo 1S 3-pin to 1B 4-pin For TRINITY Gen.1, GPI Pro
TRINITY Gen.1 PWR GPI, Lemo 2B 3-pin to 1B 4-pin

K2.0010302

12 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the Top Stage. Lemo 2B 3-pin to 1B 4-pin For TRINITY Gen.1, GPI Pro
TRINITY Gen.1 PWR, Lemo 1S 3-pin to 1S 3-pin 90°

K2.0024100

24 V high-capacity power cable to connect the TRINITY Battery Hanger Gen.1 with the Top Stage. Lemo 1S 3-pin to Lemo 1S 3-pin, 24 V NOTE Only for TRINITY Gen.1 upgraded t...
TRINITY Gen.1 Joystick Main Cable

K2.0014805

TRINITY Gen.1 Joystick Main Cable including the BNC-SMB Cable. Lemo 1B 8-pin to Lemo 0B 7-pin, 12 V For TRINITY Gen.1 only!
Joystick Pwr. Cable for ARRI Starlite

K2.0014801

Power cable to connect the ARRI Starlite monitor to the TRINITY Gen.1 Joystick Monitor Mount. Lemo 0B 5-pin 90° elbow to Lemo 0B 5-pin, 12 V For TRINITY Gen.1 only!
Joystick Pwr. Cable for Starlite

K2.0014803

Power cable to connect the Transvideo Starlite, or SmallHD 503 monitor to the TRINITY Gen.1 Joystick Monitor Mount. Lemo 0B 5-pin 90° elbow to Lemo 0B 2-pin, 12 V For TRIN...
Post Main Cable, 3B, 10-pin

K2.0010552

Main cable for artemis Gen.1 and TRINITY Gen.1. High-capacity 12 V/24 V, 2 x 4G video, tally Lemo 3B 10-pin to Lemo 3B 10-pin For artemis Gen.1 and TRINITY Gen.1 only!

CSS protection

TRINITY upgrade for artemis 2B, 2.5in, Basic Set, Gold Mount

KK.0020657

Equipped with two Gold-Mount battery mounts. Note: The KK set will come with a foam inserts which will fit into the SKB 3i-2317-14BE case. The SKB Case K2.0016275 is not ...
- Show Components
ARTEMIS Rain Cover Lower Sled

K2.0010466

Rain and dust protection for the lower sled and battery hanger assembly. For all ARTEMIS and TRINITY systems

CSS grip

Top Attachment Bracket TAB-1

K2.0041117

The TAB-1 helps stabilizing the camera rigs in some configurations with ARRI CSS. The TAB-1 links top-mounted 15mm LWS camera rods to the top of CSS products such as SRH-3 ...
Top Point Kit

K2.0020638

Designed by Mike Johnson in the US, the Top Point Kit adds stability to all stabilizer rigs requiring good resistance to vibrations and flex. The kit is not limited to ARRI...
MSP-1, Multi Support Plate for TRINITY

K2.0015385

The Multi Support Plate MSP-1 for the TRINITY 2 and Gen.1 allows the use of the TRINITY head as a standalone, handheld, two-axis, fully stabilized gimbal. The MSP-1 include...
CSS Euro Mount

K2.0010426

With the CSS Euro mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Euro mount, the TRINITY ...
CSS Mitchell Mount

K2.0010427

With the CSS Mitchell mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Mitchell mount, the ...

CSS support

ARTEMIS Vest

K2.0010333

Highly adjustable and modular vest. Only the most comfortable and modern fabrics are used for the ARTEMIS vest. Fits any operator with a height from 1.5 m up to 2.1 m/4.9' ...
ARTEMIS Carbon Spring Arm, 19 kg/41.8 lb, Pro Set

KK.0020296

The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and tors...
- Show Components
ARTEMIS Carbon Spring Arm, 23 kg/50.7 lb, Pro Set

KK.0020297

The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and tors...
- Show Components
ARTEMIS Carbon Spring Arm, 26 kg/57.3 lb, Pro Set

KK.0020298

The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and tors...
- Show Components
ARTEMIS Carbon Spring Arm, 30 kg/66.1 lb, Pro Set

KK.0039452

The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and tors...
- Show Components
Spring Set for Spring Arm, 19 kg/41.8 lb

K2.0010500

Complete spring set made up of two spring sets, one for each arm segment. Capacity: 19 kg/41.8 lb For all ARTEMIS spring arms
Spring Set for Spring Arm, 23 kg/50.7 lb

K2.0010501

Complete spring set made up of two spring sets, one for each arm segment. Capacity: 23 kg/50.7 lb For all ARTEMIS spring arms
Spring Set for Spring Arm, 26 kg/57.3 lb

K2.0010502

Complete spring set made up of two spring sets, one for each arm segment. Capacity: 26 kg/57.3 lb For all ARTEMIS spring arms
Spring Set for Spring Arm, 30 kg/66 Ib

K2.0037438

Complete spring set made up of two spring sets, one for each arm segment. Capacity: 30 kg/66 Ib For all ARTEMIS spring arms
C-Stand with detachable Turtle Base

K2.0010433

Steel C-stand with detachable Turtle Base . Max. height 155 cm/61" NOTE To park the MAXIMA the Spider (K2.0010425) is needed For all ARTEMIS and TRINITY systems

TRINITY 2

Motion beyond limits

TRINITY 2 used handheld as body-mounted steadicam

ARTEMIS 2

Pure stability

ARTEMIS 2 in Use walking downstairs as a body-mounted steadicam rig.