Accessories for MAXIMA

Stabilizer Adapter Mount SAM-2 for ALEXA Mini

K2.0014215

The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...

Stabilizer Adapter Mount SAM-3 for AMIRA

K2.0014630

The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...

Stabilizer Adapter Mount SAM-4

K2.0033662

The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.

CSS Short QL Plate 200 mm (SAM plate standard width)

K2.0019295

Reinforced dovetail plate using the SAM dovetail width. Length: 200 mm/7.87" Weight: 190 g/6.70 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA

CSS Long QL Plate 315 mm (SAM plate standard width)

K2.0019294

Reinforced dovetail plate using the SAM dovetail width. Length: 315 mm/12.4" Weight: 250 g/6.7 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA

CSS Extra long QL Plate 450 mm (SAM plate standard width)

K2.0033425

Reinforced dovetail plate using the SAM dovetail width. Length: 450 mm/17.7" Weight: 457 g/16 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA

Counterweight Set, 150 g, 300 g

KK.0033710

The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counter...

SSB-1, Stabilizer System Bracket for TRINITY, MAXIMA

K2.0035956

This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA. The SSB-1 can be also mounted at the front and b...

CSS Euro Mount

K2.0010426

With the CSS Euro mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Euro mount, the TRINITY ...

CSS Mitchell Mount

K2.0010427

With the CSS Mitchell mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Mitchell mount, the ...

Pan Lock for MAXIMA

K2.0014908

Clamp bracket to lock the pan axis of the MAXIMA.

Mounting Plate for MAXIMA

K2.0014909

Additional cheese plate with 3/8" threads, which can be mounted to the right side at the top of the MAXIMA Length: 12.7 cm/5", Width: 9.2 cm/3.62"

Top Holder for MAXIMA

K2.0010336

Top holder to mount the MAXIMA on cranes, jib arms, and rigs. NOTE The Euro mount (K2.0010426) and Mitchell mount (K2.0010427) can be used with the top holder.

Spider for MAXIMA

K2.0010425

Mounting bracket to use the MAXIMA with spring arms using the standard 5/8" arm post. With the optional Euro and Mitchell mounts, the Spider can be used on dollies and cran...

Cone for Spider, MAXIMA QL

K2.0014995

Spare cone for the Spider (K2.0010425) used with the MAXIMA QL. Fits spigots and arm posts with 15.9 mm/5/8" diameter

Thumb Controller for MAXIMA

K2.0010424

Spare mini joystick control for tilt and pan, which can be mounted to the frame of the MAXIMA, right above the rubber handle. NOTE Roll can only be done through the wirele...

Wireless Remote for MAXIMA, TRINITY Gen.1

K2.0010337

Bidirectional 2.4 GHz diversity wireless control for tilt, pan and roll. 1.5" OLED display for status and profile information. Range up to 250 m/820' For MAXIMA and TRI...

Arm Post 10", 5/8" for Spring Arm

K2.0010455

Arm post with a diameter of 5/8"/15.8 mm and a length of 10"/254 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts

Arm Post 12", 5/8" for Spring Arm

K2.0010456

Arm post with a diameter of 5/8"/15.8 mm and a length of 12"/300 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts

Arm Post Clamp Ring 5.8"

K2.0010510

Spare arm post clamp ring Fits any 5/8"/15.8 mm arm post

ARTEMIS Vest

K2.0010333

Highly adjustable and modular vest. Only the most comfortable and modern fabrics are used for the ARTEMIS vest. Fits any operator with a height from 1.5 m up to 2.1 m/4.9' ...

Hex Key 4 mm/5.32"

K2.0010434

3/8in-16 Camera Screw

K2.0037206