Cables and Power Supplies

WVR-1s Battery Adapter AMicro BAG-1s

K2.0024374

Attaches to the back of the Wireless Video Receiver small WVR-1s and accepts Gold mount and Bebob AMicro batteries. Additional 12 V accessories can be powered by the 2 pin ...

WVR-1 Battery Adapter V-lock BAV-1

K2.0014205

Attaches to the back of the Wireless Video Receiver WVR-1 and accepts V-lock batteries. Additional 12 V accessories can be powered by two 2 pin Lemo-type power outputs. Not...

WVR-1 Battery Adapter Gold Mount BAG-1

K2.0014204

Attaches to the back of the Wireless Video Receiver WVR-1 and accepts Gold mount batteries. Additional 12 V accessories can be powered by two 2 pin Lemo-type power outputs....

WVR-1 Battery Adapter L-series BAL-1

K2.0014213

Attaches to the back of the Wireless Video Receiver WVR-1 and accepts up to two Sony L-series batteries. Note: Not compatible with the Wireless Video Receiver small WVR-1s.

Receiver Power Supply RPS-1

K2.0014774

AC power supply that powers the Wireless Video Receiver WVR-1. Can also be used to power Wireless Video Transmitter (WVT-1) or Universal Motor Controller (UMC-4). Internati...

Cable PWR OUT/12V (2p) - RS/PWR IN (3p) (0.5m/1.6ft)

K2.0014331

Cable PWR OUT 12V Lemo-type 2pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power but no RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from ...

Cable PWR OUT/12V (2p) - XLR (4p) (0.5m/1.6ft)

K2.0014342

Cable PWR OUT/12V connector Lemo-type 2p (male) to XLR 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate or a...

Cable PWR OUT/12V (2p) - MiniXLR (4p) (0.5m/1.6ft)

K2.0014343

Cable PWR OUT/12V connector Lemo-type 2p (male) to Mini XLR 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate...

Cable PWR OUT/12V (2p) - Hi (4p) (0.5m/1.6ft)

K2.0014344

Cable PWR OUT/12V connector Lemo-type 2p (male) to Hirose-type 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter pl...

Cable PWR OUT/12V (2p) - Le (5p) (0.5m/1.6ft)

K2.0014777

Cable PWR OUT/12V connector Lemo-type 2p (male) to Lemo-type 5p (male). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate ...

Cable PWR OUT/12V (2p) - LCS (5p) (0.3m/1ft)

K2.0024590

Powers ARRI hand units (WCU-4 and SXU-1) from a 2-Pin Lemo style power source.

Cable Hi (4p) - RS/PWR IN (3p) (0.5m/1.6ft)

K2.0014336

Cable Hirose-type 4pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power but no RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a camera o...

Cable Fi (3p) - RS/PWR IN (3p) (0.25m/0.8ft)

K2.0014337

Cable RS 24V Fischer-type 3pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power and RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a cam...

Cable RS/PWR IN (3p) - PWR OUT/12V (2p) (0.15m/0.5ft)

K2.0014776

Cable PWR OUT/12V connector Lemo-type 2 pin (male) to PWR IN/RS Fischer-type 3 pin (female). Can be used to power Wireless Video Transmitter WVT-1 when used in the Battery ...

HDTV BNC Cable (0.3m/1ft)

K2.0014991

USB Cable WVS

K2.0014216

A standard USB cable that can be used to update the software of the wireless video transmitter inside the ALEXA LF and ALEXA SXT W, the software of the Wireless Video Trans...

USB Micro Cable WVS

K2.0024039

A standard USB Micro cable that can be used to update the software of the Wireless Video Receiver small WVR-1s. Note: Not compatible with the wireless video transmitter ins...

Cable Antenna Extension (1.0m/3.3ft)

K2.0014152

Connects an antenna (SMA) connector used for Wireless Video System (WVS), WiFi and Electronic Control System (ECS) on ALEXA camera bodies to an antenna. One angled and one ...